Motorbike Protection

High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black Note: NOT compatible with the OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Standad (does NOT fit the Adventure Sports models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Improper cleaning can result in scratches, hazing, surface crazing and cracking.

High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black NOT compatible with OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Adventure Sports (does NOT fit the Standard models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Cleaning improperly can result in scratches, hazing, surface crazing and cracking.

High-quality clear headlight guard by ALTRIDER, suitable for the Yamaha Tenere 700 model. Constructed in the United States from 3/16 inch (4.7 mm) thick scratch-resistant polycarbonate, the ALTRIDER headlight guard is made of extremely strong, impact-resistant polycarbonate - the same material as bullet-proof windows. This material is formulated with a hardened scratch-resistant surface, both front and rear. The dual lenses are secured with two 1/16 inch (2 mm) laser-cut textured powder coat steel brackets that are extremely resistant to rust and weathering.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets, using custom-machined aluminum ball studs and rubber sockets to mount the lens to the frame. The no-tools quick-release system allows for easy removal of the face for cleaning. NOTE: Polycarbonate will react to certain chemicals and requires specific care to be cleaned correctly and kept looking good for the long haul. Improper cleaning can result in scratches, hazing surface and cracking. Specifications 100% designed and manufactured in the USA Fits the Yamaha Tenere 700 model Polycarbonate lens protects headlight without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated

Stylishly designed cowl support bracket by ALTRIDER, suitable for the below-mentioned Yamaha models. All in all, the Yamaha Tenere 700 is an excellent model. However, the OEM headlight and cluster assemblies are mounted inadequately regarding any tough off-road riding, which can result in unwanted and excessive shaking and wobbling or even in a strobe light effect from the headlight on larger bumps. This typically occurs when riding down a dirt or gravel road, over a rail crossing or any other similar bumps. To assist in reducing or eliminating this unwanted shaking and to help brace the OEM headlight and cluster assembly, ALTRIDER has designed the cowl support bracket for the Tenere 700. This practical item serves to stabilize the OEM instrument panel and any accessories mounted to the cross bar, including tablets and GPS. The ALTRIDER cowl support functions as a strong link between the rear of the TFT display and the windshield brace bar, which can also be used as a GPS mount bar. Its design imparts stability by tying these items into a triangle. The instrument cluster as well as the windscreen and headlight mount points are unified by the specially formed cowl support. Specifications Made in the USA Formed from 14 gauge (0.6 "/1.6 mm thick) steel Mounts to OEM locations with both included hardware and OEM hardware Reduces movement and/or shaking of the instrument cluster and headlight wobble Available in powder-coated black and brushed silver - please select from above Suitable for:  Yamaha Tenere 700 from MY 2019

High-quality fork leg guards by ALTRIDER, which are also included in the High Fender Kit for the Ducati Desert X (available separately). This article comes in very useful when the bike's original front fender is replaced by a higher one. The fork leg guards have been custom manufactured and are laser-cut from 5/64 inch (2 mm) powder-coated aluminum. They mount at three locations and include provisions for brake hose routing clips. They fit perfectly to the OEM mount points and include a hose routing. No cutting or drilling needed, ALTRIDER’s guards fit right out of the box. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Suitable for Ducati Desert X Fits with all ALTRIDER accessories Delivery includes all the necessary mounting material Available in black, white or red - please select from above

High-quality Front Engine Guard by ALTRIDER, specifically designed for the below-mentioned BMW models. Made of 1/16 inch (1.9 mm) brushed stainless steel, the Front Engine Guard easily mounts with a ball stud and rubber grommet system. A closer fit and larger surface area than other brands means maximum protection as well as a better clearance of the fender. Aluminum ball studs with stainless steel threads replace the OEM hardware, and rubber grommets on the guard itself allow an easy removal of the guard for cleaning after a muddy ride. Specifications 100% designed and manufactured in the USA Made of 1/16 inch (1.9 mm) brushed stainless steel Offering reliable underbody protection against stone chipping and collisions Close fit for a better fender clearance Easy removal with a ball stud and grommet system Easy installation - delivery includes all the necessary mounting material Available in black or silver - please select from above Compatible with the ALTRIDER Skid Plate (available separately, see below) Suitable for: BMW R 1250 GS BMW R 1250 GS Adventure BMW R 1250 GS Adventure HP BMW R 1250 GS Adventure Exclusive

High-quality mesh headlight guard by ALTRIDER, suitable for the Yamaha Tenere 700 model. Constructed of 1/16 inch (2 mm) laser-cut steel, this headlight guard provides total coverage for the headlight assembly without interfering with the light output. Its meticulously designed mesh pattern minimizes the loss of illumination while actually blocking any damaging debris.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets using custom-machined aluminum ball studs and rubber sockets to mount the lens to the brackets. The no-tools quick release system allows for an easy removal of the face for cleaning and the textured powder coat finish is extremely resistant to rust or weathering. Specifications 100% designed and manufactured in the USA Fits the Yamaha Tenere 700 model Mesh face deflecting debris without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated 

Set of mounting brackets to mount the ALTRIDER Skid Plate KT13-x-1200 (available separately) to the below-mentioned KTM models. Suitable for: KTM 1290 Super Adventure        2015-2016 KTM 1290 Super Adventure T     from MY 2017

High-quality radiator guard by ALTRIDER, suitable for the Honda CRF1000L Africa Twin (Standard and Adventure Sports models). A radiator puncture due to road debris is a serious threat to ruin your day of riding. That is why ALTRIDER radiator guards were designed to protect the radiator from road debris while allowing as much airflow as possible. ALTRIDER radiator guards are constructed from 1.4mm aluminum and feature louvered cutouts, a technique that serves two important purposes. First, the bent louvers increase the stiffness of each guard in comparison to guards with flat cutouts or screens. Second, the louvers allow greater airflow compared to flat cutouts while the angled design provides maximum coverage from rocks and other debris. The laser cut guards are grained to remove burrs, formed and anodized for durability. Each radiator guard floats above the radiator itself to allow full cooling function, and mounts to three factory hard points for robustness. Installation is a breeze with the included high quality hardware, and no cutting or other modifications are necessary. ALTRIDER radiator guards for the Africa Twin are available in silver and black, and are 100% designed and manufactured in the USA. Specifications Constructed from 1.4mm aluminum Louvers increase strength and allow greater airflow Mounts to three factory hard points Available in silver and black

High-quality radiator guard by ALTRIDER, custom-made for the Yamaha Tenere 700 model. A fully functioning cooling system is vital for keeping the bike running smooth, but the radiator can be exposed and susceptible to damage from rocks and road debris. This practical radiator guard is designed with louvers to offer maximum protection of the radiator while maintaining optimal airflow to help keep the motor cool. The louvers also provide additional rigidity to the entire piece. Specifications 100% designed and manufactured in the USA Laser-cut 14 gauge (1.63 mm thick) aluminum protects the radiator from dangerous debris Louvered design provides maximum coverage without restricting airflow Easy to install with the mounts using stock OEM hardware - no additional hardware required Replaces the entire OEM radiator shroud assembly Available in an anodized silver or black finish - please select from above Suitable for:   Yamaha Tenere 700

High-quality side stand enlarger by ALTRIDER, suitable for the below-mentioned Honda models. The enlarger is laser-cut and machine-formed to perfectly fit onto the Honda Africa Twin’s side stand foot. Torx fasteners secure the enlarger to the side stand foot while reducing the risk of tool stripping during installation. The weight is minimal to avoid the side stand bouncing around and inadvertently cutting the ignition. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made from 1/8 in (3.18 mm) thick stainless steel Two-piece design for a perfect fit Minimal weight to avoid accidental deployment during riding Available in brushed silver or powder-coated black - please select from above Suitable for: Honda CRF1100L Africa Twin Standard Honda CRF1100L Africa Twin Adventure Sports

Stylishly designed side stand foot extension by ALTRIDER, suitable for the below-mentioned Yamaha models. This side stand extension offers a large contact surface to improve the motorcycle’s parking footprint on rough surfaces and soft grounds.  Specifications Made from 1/8 inch (3.18 mm) laser-cut stainless steel Perfect fit 3D design for easy grab Minimal weight to avoid accidental deployment during riding Compatible with the center stand equipped Available in powder-coated black or brushed silver - please select from above Suitable for:  Yamaha Tenere 700 from MY 2019

High-quality riser plate for the side stand enlarger by ALTRIDER (available separately), fitting the below-mentioned BMW models. While the above-mentioned side stand enlarger will help the bike keep a firm footing on loose or softer surfaces, the riser plate can be installed to prop the bike into a slightly more upright position. It can change the BMW's lean angle by as much as 5°, which improves the saftey of mounting and dismounting, making all the difference at the end of a long day of riding. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made from 0.25 inch (6.4 mm) thick stainless steel Laser-cut design for a perfect fit Extremely tough and resistant to rust and weather influences Available in powder-coated black Fits: BMW R 1200 GS                    MY 2013 and from MY 2015 BMW R1200 GSA                   from MY 2014 BMW R1250 GS und GSA     from MY 2019

High-quality skid plate by ALTRIDER, specifically designed to fit the BMW R 1200 GS model up to MY 2012. Made of sturdy 4.75 mm anodized aluminum, the ALTRIDER skid plate features a corrugated design that multiplies its strength. The 1 3/8 inch radii flanges mirror the profile of the headers, which creates a unique shape that tightly conforms to the underside of the bike.  Close turns, brush, and other off-road dangers will not pose a threat to the bike's vulnerable header pipes, because this product gives them substantial coverage. And when the front wheel spits back rocks and dirt, the ALTRIDER skid plate will protect the headers and cross pipe. Specifications  Easy installation with the included operating instructions Delivery includes all the necessary mounting material Fits all BMW R1200 GS models up to MY 2012 Fits with Akrapovic full exhaust system shotgun style Note: Currently not compatible with Remus or Two Brothers headers! Available in anodized silver 

High-quality skid plate by ALTRIDER, specifically designed for the HONDA CRF1100L Africa Twin model. This tough and robust skid plate was engineered from the ground up to provide better coverage, strength and ground clearance than any other skid plate on the market.  HONDA’s Africa Twin utilizes a classic dirtbike-inspired dual frame rail. ALTRIDER embraced this approach by designing a skid plate that builds on the advantages provided by this type of frame. Unlike other designs on the market, ALTRIDER utilizes 4 bolt locations on the frame instead of nesting the bracket on one side. This bracket design provides a strong platform to mount the skid plate using 4 heavy duty M8 (5/16”) bolts. Ground clearance is an extremely important but often overlooked consideration, especially on bigger bikes. HONDA made the effort to give this bike substantial clearance, and thanks to the bike’s frame rail design the ALTRIDER skid plate was engineered to retain as much of that clearance as possible when installed. Some skid plates utilize a corrugated design to enhance strength, but those designs also sacrifice clearance. The ALTRIDER skid plate was given a smooth bottom design for maximum clearance and easy maneuvering over obstacles, and the 4 mounting points on the frame rails make up that strength. ALTRIDER’s intelligent bracket design allows users to change the oil with the bracket in place. The skid plate is also compatible with the center stand on, and can be installed on both DCT and manual transmission models. The one-piece skid plate is simple to install, and all top-quality hardware is provided. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Custom-made for the HONDA CRF1100L Africa Twin model Also fitting the Adventure Sports model after removing the original HONDA skid plate Single piece of 4.1 mm aluminum is laser cut, grain finished, formed and TIG welded Protects entire bottom side of liquid cooled motor including headers Cut outs allow for airflow and heat dissipation Larger 2” diameter formed bends for added strength and better cornering clearance Smooth bottom surface for ground clearance and ability to slide over obstacles without getting hung up Mounts to four factory hard points, and rubber shock absorbing bumpers spread load to frame rails Mounting bracket has captured threaded fasteners for ease of installation Stainless steel fasteners for long life and corrosion resistance Compatible with HONDA Light Bar Note: NOT compatible with the optional DCT foot shifter! Available in powder-coated black

MFC-28 Bracket - delivered as a spare part for the BARKBUSTERS BHG-082 article (Honda CRF100L Africa Twin). Delivery includes 1 piece.

High-quality, functional alternator cover by POLISPORT, fitting the below-mentioned motorcycle models. Ideal for protecting the alternator against any damage during tough riding situations, especially off-road. Specifications Made of extremely tough PA6 polyamide material Abrasion and impact resistant Perfect fit High temperature resistance Easy to install, i. e. the alternator does not need to be removed Only compatible with the original alternator! Delivery includes all the necessary mounting material Available in black Fitting: Honda CRF 1100 L Africa Twin MY 2020 Honda CRF 1100 L Africa Twin Adventure Sports MY 2020-2021

High-quality, functional alternator cover by POLISPORT, fitting the Yamaha Tenere 700 model. Ideal for protecting the alternator against any damage during tough riding situations, especially off-road. Specifications Made of extremely tough PA6 polyamide material Abrasion and impact resistant Perfect fit High temperature resistance Easy to install, i. e. the alternator does not need to be removed Only compatible with the original alternator! Delivery includes all the necessary mounting material Available in black

High-quality clutch cover protector by POLISPORT, custom-made for the below-mentioned motorcycle models. This article offers reliable protection of the thin-walled OEM brake lever, even during tough off-road riding including massive falls. Specifications Made of extremely tough PA6 polyamide material Abrasion and impact resistant Perfect fit High temperature resistance Integrated O-ring to prevent vibrations Easy to install, i. e. the clutch cover does not need to be removed Only compatible with the original clutch cover! Delivery includes all the necessary mounting material Available in black Fitting: Honda CRF 1100 L Africa Twin MY 2020 Honda CRF 1100 L Africa Twin Adventure Sports MY 2020

High-quality clutch cover protector by POLISPORT, custom-made for the Yamaha Tenere 700 model. This article offers reliable protection of the thin-walled OEM brake lever, even during tough off-road riding including massive falls. Specifications Made of extremely tough PA6 polyamide material Abrasion and impact resistant Perfect fit High temperature resistance Integrated O-ring to prevent vibrations Easy to install, i. e. the clutch cover does not need to be removed Only compatible with the original clutch cover! Delivery includes all the necessary mounting material Available in black

High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned KTM and Husqvarna models. Specifications Made in the USA Machined in one piece from a 1.5" (3.8 cm) thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Corresponding MOTOMINDED ABS Cable Guide available separately Available in the following colours - please select from above: Black anodised Orange anodised Blue anodised Fits:  KTM 790/890 Adventure S/R/Rally Husqvarna 901 Norden