BMW F650 / F700 / F800 GS

High-quality BARKBUSTERS plastic handguards for the EGO-001 handguard set (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Made of high-impact, extremely resistant plastic Curved profile, ideal for tight bush riding Available in many different colours (please select from above)

High-quality handlebar riser kit by BARKBUSTERS, rising the bar by 20 mm. Suitable for the below-mentioned BMW models. Specifications  Made of an extremely tough aluminium alloy Fits 22mm standard handlebars with a 35mm to 38mm hole separation  Optimises the riding position Available in silver Delivery includes the necessary mounting material and instructions Note: It is essential to always check and confirm that the bike has the adequate cable and brake line lengths before installing any handlebar risers! Suitable for: BMW F650GS    up to MY 2007 BMW G650GS   2006-2008 BMW R100GS    up to MY 1990

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for BMW and Triumph models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit and bar end weights included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers Suitable for:  BMW F650GS - twin engine     2008-2012 BMW F800GS                             2008-2012 BMW R1200GS                          up to MY 2012 BMW R1200GSA                        up to MY 2013 BMW HP2 Megamoto              2007-2009 TRIUMPH Tiger 1050 Sport     up to MY 2013

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW and Yamaha models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers Suitable for:  BMW F 700 GS E8GS (K70) from 2013 BMW F 800 GS E8GS (K72) from 2013 BMW F 800 GS Adventure E8GS (K75) from 2013 Yamaha XT1200Z Super Tenere DP01 from 2010

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW and Yamaha models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers Suitable for:  BMW F 700 GS E8GS (K70) from 2013 BMW F 800 GS E8GS (K72) from 2013 BMW F 800 GS Adventure E8GS (K75) from 2013 Yamaha XT1200Z Super Tenere DP01 from 2010

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned motorcycle models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers Suitable for:  Aprilia Shiver                     MY 2013 BMW F700GS                    from MY 2016 BMW F800GS                    from MY 2016 BMW F800GSA                  from MY 2016 Honda CB125E Honda CB500F                  from MY 2013 Honda CB500X                  2016-2018 Honda CB650F Honda CB650R                 from MY 2019 KTM 200 Duke                  from MY 2013 KTM 390 Duke                  from MY 2013 Suzuki SFV650 Gladius    MY 2009

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar End Weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers Suitable for:  BMW F 800 GS MY 2024+BMW F 800 GS Sport MY 2024+BMW F 800 GS Triple Black MY 2024+

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black

High-quality BARKBUSTERS plastic handguards for JET01 and JET02 (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above)

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system!

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface)

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits hollow handlebars. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: For 1 inch hollow handlebars, an adaptor kit will be required (available separately, code: B-074)!

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits handlebars with 6mm or 8mm internal thread. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: Some Triumph models have a 5mm internal thread which must be drilled and tapped to 6mm!

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits straight handlebars with 22mm (7/8") or 25.4mm (1") diameters (please select from above). Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Note: Regarding 22mm (7/8") handlebars, installation requires 18mm of free straight handlebar space to the inside of the handlebar controls! Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately)

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones Available in various different colours (please select from above) Other colours on request

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics Note: Does NOT fit with Storm plastics! Available in black