BMW F750 / F850 GS

High-quality, clear headlight guard by ALTRIDER made of tough polycarbonate, suitable for the BMW F 850 / 750 GS models. The front ends of the above-mentioned BMW models sport a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in powder-coated black NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Cleaning improperly can result in scratches, hazing, surface crazing and cracking.

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Suitable for the below-mentioned BMW models. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position, regardless of the riding position.  Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications 100% designed and manufactured in the USA Suitable for BMW F 850 / 750 GS Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 25,4 mm (1 inch) riser height Pins provided with enlarger for enhanced grip, extras included Delivery includes the necessary mounting material Enlarger and riser available in black Patent Pending

High-quality clear headlight guard by ALTRIDER, suitable for BMW F 850 / 750 GS models. The front ends of the above-mentioned BMW models sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening it at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bikes' aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States from laser-cut stainless steel, the mesh headlight guard mounts to four factory hard points by way of the laser-cut stainless steel mounting bracket. The quick-release system means no tools are required to remove the mesh screen for cleaning in the field. Specifications Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Extremely resistant against corrosion and weather Delivery includes the necessary mounting material Suitable for BMW F 850 / 750 GS Available in black powder-coated 

High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for  BMW F 850 / 750 GS models. The ALTRIDER luggage rack for the above-mentioned BMW models is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box. Installation is quick and easy with the included stainless steel hardware.  Specifications All ALTRIDER products are 100% designed and manufactured in the USA Laser cut from 3/16 inch (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts (available separately) and GIVI Monokey top cases Delivery includes the necessary mounting material Suitable for BMW F 850 / 750 GS Available in black anodized

High-quality side stand foot enlarger by ALTRIDER, offering substantially more safety and comfort on off-road terrain. Custom-made for the BMW F 850 / 750 GS models. Made from 1/8 inch (3.18 mm) stainless steel, this article features a 3D tread to create better traction for the boots and to allow an easy pulling down of the side stand while still on the bike. Even after months of use, the ALTRIDER side stand foot will remain tight because it clamps down on the actual foot of the side stand with Torx fasteners. Specifications 100% designed and manufactured in the USA Offering excellent resistance against corrosion and weather Two-piece design for a perfect fit Minimal weight to avoid accidental deployment during riding Torx fasteners (requires T-25 Torx driver) Delivery includes the necessary mounting material Available in powder-coated black NOTE: The BMW F850 ADV and some standard models are being shipped with different side stands. In this case, the ALTRIDER side stand enlarger will only fit one of these side stands. Therefore, please view the comparison image above in order to determine if this part is suitable for the side stand in question.

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned BMW models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately) Suitable for:  BMW F750GS        from MY 2018 BMW F850GS        from MY 2018 BMW F850GSA      from MY 2018 BMW R1250GS      from MY 2018 BMW R1250GSA    from MY 2019

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned BMW models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately) Fits:  BMW F900GS        from MY 2024

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black

High-quality BARKBUSTERS plastic handguards for JET01 and JET02 (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above)

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system!

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface)

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones Available in various different colours (please select from above) Other colours on request

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics Note: Does NOT fit with Storm plastics! Available in black

High-quality, practical fit kit by KRIEGA, specifically designed for fixing KRIEGA US-Drypacks or OS-Adventure Packs to BMW Adventure bikes. Allows easy fitting of any size/combination of KRIEGA US-Drypacks (5-90 litres, available separately). With some technical skills, it is also possible to mount this fit kit to other bikes than the Ducati Scrambler. Delivery includes: 4 Hypalon & bolt-on webbing loops, 2x50 and 2x 65 mm - 6mm hole each 8 x M6 washers, 4 M6x30 screws and 4x M6 nyloc bolts Plug and Play: Designed to fit exclusively BMW R1250GS, F750GS, F850GS! 10-year guarantee - learn more Install as follows: Loosen the 4 luggage rack screws and replace them by the 4 long M6 screws included in the delivery, then tighten them to 5 Nm Slide an M6 washer into each Hypalon end of the screw-on loops The two 50 mm screw-on loops are mounted on the rear underside of the luggage rack. Attach the loops to the additional thread of the M6 ​​screws with another washer and a Nyloc nut Repeat the process on the front of the rack using the 65mm bolt-on lugs, then tighten the nuts