Honda NX / XL / XR

High-quality BARKBUSTERS plastic handguards for the EGO-001 handguard set (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Made of high-impact, extremely resistant plastic Curved profile, ideal for tight bush riding Available in many different colours (please select from above)

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned motorcycle models. Specifications  Delivery includes two frames, bar-end weights and a complete mounting kit for easy installation Made of heat-treated aluminium for added strength and impact protection Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers Suitable for: Honda CB500X                             2013-2015 Honda NC700X                             DCT & non-DCT models Honda NC750X                             DCT & non-DCT models Honda XL1000V Varadero          all (requires the removal of the original external and internal bar weights!) Honda VFR1200X Crosstourer   non-DCT models Kawasaki KLZ1000 Versys          up to 2014 Suzuki DL650 V-Strom Suzuki DL650XT V-Strom           from 2015 Suzuki DL1000 V-Strom Suzuki DL1000XT V-Strom         up to 2017

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for the below-mentioned Honda models.Specifications Delivery includes two framesMade of heat-treated aluminium for added strength and impact protectionComplete mounting kit included for easy installationBar end weights includedNote: This product does NOT include the corresponding plastic covers!Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately)Fits:Honda CB 500 X       from MY 2019Honda CB 400 X       from MY 2020Honda NX 500          from MY 2024

Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with 22mm (7/8th) handlebars. Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately) Please note: Installation on the model Husqvarna TE (Italy) up to 2013 with a 22mm Tommaselli handlebar requires the additional fixing of the 12mm Bar End Mounting Kit B-029 by BARKBUSTERS (available separately, see below).

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black

High-quality and robust handguards by BARKBUSTERS's, specifically designed for trail and enduro riders. Specifications Featuring strong, heat-treated aluminium backbones for maximum strength Ergonomic drop-down design of the backbone, ideal for bikes with long levers One pair of highly impact-resistant plastic guards included, offering reliable protection from hard dirt etc. Also included: Three axis mounting clamps for easy installation and mounting hardware to fit 22mm (7/8th) handlebars Available in various different colours (please select from above)

High-quality BARKBUSTERS plastic handguards for JET01 and JET02 (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above)

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system!

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface)

High-quality, tough MX handguard set by BARKBUSTERS, including 2 premium EGO plastic guards. Specifications Delivered in pairs (L/R) Designed for Enduro and Trail bikes To fit straight 22mm (7/8″) handlebar Two mounting points secure the full wrap around aluminium design Compact curved profile ideal for tight bush riding Heat treated aluminium backbone for maximum strength Replaceable, high impact resistant EGO plastic guards included Large range of colours matched to popular motorcycle brands NOTE: 28.5mm straight section handlebars such as Renthal Twin Wall and Barkbusters VSBar require an additional 28.5mm clamp saddle set, code: BSS-00 (sold separately) Set not ideal for bikes with long clutch and brake levers!

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits hollow handlebars. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: For 1 inch hollow handlebars, an adaptor kit will be required (available separately, code: B-074)!

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits handlebars with 6mm or 8mm internal thread. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: Some Triumph models have a 5mm internal thread which must be drilled and tapped to 6mm!

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits straight handlebars with 22mm (7/8") or 25.4mm (1") diameters (please select from above). Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Note: Regarding 22mm (7/8") handlebars, installation requires 18mm of free straight handlebar space to the inside of the handlebar controls! Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately)

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones Available in various different colours (please select from above) Other colours on request

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics Note: Does NOT fit with Storm plastics! Available in black

Premium replacement shift lever by BUZZETTI, fitting the below-mentioned Honda and Yamaha models. Specifications Made of tough steel Accurately fitting Available in black with a silver foot lever Fitting: Honda XL 350 - 1985-1988 Honda XL 600 - 1983-1987 Honda NX 650 Dominator - 1988-2000 Yamaha XT 550 - 1982-1983 Yamaha XT 600 - 1984-1990 Yamaha XT 600 Z Tenere - 1983-1991 Yamaha XTZ 660 Tenere - 1991-1993

High-quality rear sprocket by WRP, made of tough aluminium. Suitable for the below-mentioned Honda models. Specifications CNC-machined from an ultra-strong aluminium alloy Exceptional durability guaranteed Special shape to avoid mud between teeth and chain Light-weight, stylish design Available with 46, 48 or 50 teeth - please select from above Suitable for: Honda XR R 250    1990-1997 XR R 400    1996-2000 XR 600        1991-2000 XR R 650     2000-2007