Honda CRF 300 L / Rally

High-quality luggage rack by ALTRIDER, fitting the below-mentioned Honda models. This robust and durable rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. Specifications 100% designed and made in the USA Fitting Honda CRF 300 L / Rally Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts Textured powder-coated black 10 gauge steel brackets securely mount the rack to the sub-frame at four points Quick and easy installation with the included stainless steel hardware Available in black and silver - please select from above

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for the Honda CRF 300L model from MY 2021. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately) NOTE: Does NOT fit any Rally models!

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for the Honda CRF 300 Rally model from MY 2021. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately)

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black

High-quality BARKBUSTERS plastic handguards for JET01 and JET02 (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above)

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system!

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface)

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones Available in various different colours (please select from above) Other colours on request

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics Note: Does NOT fit with Storm plastics! Available in black

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Honda CRF300L and CRF300 Rally models without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two Honda Strap Mounts included in the delivery, which are simply exchanged for the original mountings. The four CRF Bolt-on Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).  The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. Specifications Specifically designed and manufactured for the Honda CRF300L and CRF300 Rally models Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 800g / 1.7lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x Honda strap mounts and 4 x CRF bolt-on loops 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle.