Luggage

High-quality, practical mounting kit for securely attaching most GIVI Monokey top cases to the ALTRIDER luggage racks (available separately, see below).  The mounts and hardware included in the kit attach to the luggage racks through the pre-drilled GIVI mounting points already measured to the GIVI Top Case specifications on the rack. The hardware and mounts are very slim and unobtrusive when the top case is not attached to the rack so the kit does not interfere with any strapped-down gear. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Fits almost any GIVI Monokey compatible top cases Note: NOT compatible with Outback Trekker cases!

High-quality luggage rack by ALTRIDER, fitting the below-mentioned Honda models. This robust and durable rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. Specifications 100% designed and made in the USA Fitting Honda CRF 300 L / Rally Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts Textured powder-coated black 10 gauge steel brackets securely mount the rack to the sub-frame at four points Quick and easy installation with the included stainless steel hardware Available in black and silver - please select from above

High-quality luggage rack system by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box (requires the Givi Top Case mounting kit). Compatible with the R 1200/R 1250 GSW Adventure with the rear luggage rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). An alternative configuration allows the simultaneous mounting of the pillion rack, factory plastic rack with grab handles, and rear rack in upper position bolted to the factory rack (see image above). The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Note: The pillion rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Dimensions: length = 27.9 inch (70.8 cm) x width = 16 inch (40.6 cm) Weight: 6 lbs (2.8 kg) Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases Solid top surface on pillion rack helps prevent water intrusion Available in anodized black and silver - please select from above

High-quality, practical luggage rack system by ALTRIDER, suitable for he Honda CRF1000L Africa Twin. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. Both racks are compatible with factory side cases and are available in both a clear anodized silver and black anodized finish. Specifications Laser cut from 3/16 in (4.76 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases Solid top surface on pillion rack helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin standard models from MY 2018 - 2019 (not suitable for Adventure-Sports-models)

High-quality pillion luggage rack by ALTRIDER, suitable for the  BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER pillion luggage rack is the only offering on the market to replace the rear seat and combine with the ALTRIDER Rear Luggage Rack (available separately) for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. For the ultimate carrying capacity, combine the pillion rack with ALTRIDER's Luggage Rack System (available separately). The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Also compatible with the R 1200/R 1250 GSW Adventure (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of ALTRIDER's Luggage Rack System for the BMW R 1200/R 1250 GS + GSA LC (available separately) Dimensions: Length = 14.4 inch (36.6 cm) x Width = 12.4 inch (31.5 cm) Weight: 3 lbs (1.4 kg) Mounts using pillion seat keyed latch – no hardware or tools required Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in anodized black and silver  - please select from above

High-quality pillion luggage rack by ALTRIDER, suitable for the Honda CRF1000L Africa Twin. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with factory side cases and the factory rear top box, and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin Standard        MY 2018 and up Honda CRF1000L Africa Twin ADV Sports    MY 2017 and up

High-quality pillion luggage rack by ALTRIDER, suitable for the below-mentioned Honda models. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality pillion luggage rack by ALTRIDER, suitable for the Yamaha Tenere 700 (2019+). This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Yamaha Tenere 700 from MY 2019

High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!) Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!) Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for  BMW F 850 / 750 GS models. The ALTRIDER luggage rack for the above-mentioned BMW models is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box. Installation is quick and easy with the included stainless steel hardware.  Specifications All ALTRIDER products are 100% designed and manufactured in the USA Laser cut from 3/16 inch (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts (available separately) and GIVI Monokey top cases Delivery includes the necessary mounting material Suitable for BMW F 850 / 750 GS Available in black anodized

This unique ALTRIDER luggage rack for the KTM Adventure-models can be mounted in multiple positions to suit most luggage needs. Bolt it directly to the factory rack to create a larger, more versatile platform for any gear. The rack can also replace the OEM rack, bringing the load and center of gravity closer to the ground. Finally, the luggage rack can be mounted without the factory rack or passenger grab handles – allowing to combine it with the ALTRIDER pillion rack to create a flat, continuous luggage surface.  All ALTRIDER luggage racks directly integrate with ROTOPAX fuel packs. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. Hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing strength. Learn more about how ALTRIDER luggage racks are developed in our blog post Hooked: How We Developed Our Luggage Racks. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Luggage rack can be mounted in multiple configurations Strategically placed cutouts provide ample mounting points without sacrificing strength Completely smooth luggage surface 3/16” (4.8 mm) laser-cut anodized aluminum Interfaces with ROTOPAX fuel packs Available in silver or black Suitable for: Husqvarna Norden 901 KTM 790 Adventure/R 890 Adventure L/R 1050 Adventure 1090 Adventure/R 1190 Adventure/R 1290 Super Adventure R-S-T

High-quality luggage rack by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER luggage rack has been constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. Installation is quick and easy with the included stainless steel hardware. The luggage rack is pre-drilled for easy integration with ROTOPAX mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokeyhard mount points, allowing for use with any Monokey-compatible top box. Compatible with the R 1200/R 1250 GSW Adventure with the rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is only compatible with the original BMW Vario side cases when mounted in the upper position!Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of the ALTRIDER Luggage System for the R 1200/R 1250 GS LC (available separately) Dimensions: length = 13.5 inch (34.3 cm) x width = 16 inch (40.6 cm) Weight: 3 lbs (1.4 kg)  Mounts in upper or lower position, without additional brackets or removing the pillion seat Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts and GIVI Monokey top cases Available in anodized black and silver  - please select from above

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1000L Africa Twin. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin standard models from MY 2016 (does not fit any Adventure Sports models!)

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin Adventure Sports model. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin ADV Sports from MY 2020 (also fitting the standard model with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!)

High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for the Yamaha XT1200Z Super Tenere. The ALTRIDER luggage rack for the Super Tenere is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. The rack comes with a mounting bracket, made from 3/16 inch (4.75 mm) anodized aluminum, which replaces the stock plastic mounting bracket and greatly increases the rack’s capacity.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. The rack may be installed in two different positions, i. e. either in the customary high position on top of the passenger seat and handles, or in a lower position without these two items. ALTRIDER’s luggage rack for the Super Tenere is compatible with the factory side cases, and is available in a clear anodized silver finish and black anodized finish. Note: This rack is not compatible with the original YAMAHA top case! Specifications All ALTRIDER products are 100% designed and manufactured in the USA Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts (available separately) and GIVI Monokey top cases Dimensions: 3 inches (7.6 cm) x 14 inches (35.6 cm) x 14 inches (35.6 cm) (H x W x D) Weight: 3 lbs (1.4 kg) Suitable for Yamaha XT1200Z Super Tenere from MY 2010 Available in black and silver - please select from above

High-quality luggage rack by ALTRIDER, custom-made for the Yamaha Tenere 700 model. This unique rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and powder coated for a durable finish that looks great. The unique coined cutouts are specially shaped to safely accommodate a wide variety of straps and hooks, allowing to carry almost any piece of luggage or item securely. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. All ALTRIDER luggage racks directly integrate with ROTOPAX fuel packs (available separately). The hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing any strength.  Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 3/16” (4.8 mm) laser-cut anodized aluminum Completely smooth luggage surface Including two 3.2mm thick steel fittings ensuring a secure four-point mounting on the rear frame Interfaces with ROTOPAX fuel packs Delivery includes the necessary installation hardware Available in silver or black - please select from above NOTE: Delivery does NOT include the pillion rack shown above, it is available separately!

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin standard model. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020

High-quality, waterproof saddlebag by ALTRIDER, available in various colours and sizes (see below). Each bag has a fully tape-seam sealed, D-shaped body construction made of 18oz vinyl coated fabric (“Truckers Tarp”). The SYNCH bags are designed to be 100% dust and waterproof, engineered to withstand the most extreme temperatures and wet weather over hundreds and thousands of miles of trails and roads.   SYNCH was designed with accessibility and flexibility in mind. Each bag features daisy chains for easy lashing of camping gear like bed rolls and tents. There are four anchor points with high strength nylon D-rings for strapping the bags to the bike and for connecting bags to each other. All of the anchor patches are made from a military grade, waterproof and chemical resistant neoprene. Designed for quick entry, the side openings of the M-sized bags allow access to either of the bags' two openings without having to release the tie-down straps. This holds true when the bags are stacked on each other as well.   Each dry bag includes tie-down and stacking straps. One end of the tie-down features a soft-loop style closure, perfect for attaching to crash-bars, trellis frames, luggage racks and other great tie-down points. The other end is a heavy duty, steel wire-gated military grade nylon snap-hook for securing to the bags. Specifications Made of 18oz waterproof and durable  “Truckers Tarp” synthetic material Wide-mouth roll-down opening with cinching straps Military-spec neoprene on all anchor patches Tape-seam sealed construction for water and dust proof performance Daisy chain(s) for extra gear lash-points Nylon D-rings for tie-down and stacking options Custom tie-down straps (can be used as shoulder straps for portage) Custom stacking straps (for connecting to other bags and gear) Colour options: black, grey or white Sizes available - please select from above: M: 25 liters - Approximate stuffed dimensions: 53 cm x 27 cm x 27 cm L:  38 liters - Approximate stuffed dimensions: 61 cm x 36 cm x 29 cm

Set of 2 innovatively shaped inner bags by ENDURISTAN for Blizzard saddlebags. Available in 3 different sizes (see description below) - please select from above. Specifications   Material: 420D-nylon with an outer TPU-coating Handle(s) for easy removal and transport of the bag All-round zipper Easy to clean Perfect fit Very light and durable NOTE: Not available for size S - please select size M which also fits the S-size models! TECHNICAL DETAILSSize M   Volume 17 (2 x 8.5) liters Width 39 cm Height 35 cm Depth 12.5 cm Weight 0.22 (2x 0.11) kg Size L Volume 7 (2 x 8.5) liters Width 39 cm Height 35 cm Depth 18 cm Weight 0.258 (2x 0.129) kg Size XL Volume 34 (2 x 17) liters Width 44 cm Height 37 cm Depth 20.5 cm Weight 0.292 (2x 0.146) kg  

High-quality, compactly sized bag by ENDURISTAN, made of extremely tough and long-lasting synthetic material.  The world-famous rally rider Lyndon Poskitt asked ENDURISTAN for a special organizer to transport his tools in the ENDURISTAN Fenderbag during his participation at the Rallye Dakar in 2018. Therefore, this organizer has been designed specifically for him. However, as soon as Lyndon’s organizer showed up on the social media, ENDURISTAN were flooded by requests from customers and dealers wanting to purchase it. That is why it is now available for everyone.  Featuring numerous partitions, pockets and holding loops, the Lyndon's Organizer is the ideal solution for securely carrying smallish items such as smart phones, tablets, cables, tools etc. on a motorbike. Specifications Made of sturdy synthetic material Volume: 1.2 liters Size: Approx. 24 cm x 12 cm x 4.5 cm (9" x 5" x 2") (L x W x H) Weight: Approx. 130 g (without contents) Red inner lining for high visibility 3 inside zipper pockets made of mesh for instant recognition of the content 79 elastic loops in 3 different sizes Large white labeling area on top cover Washable and easy to clean Built to last Fits perfectly into the Fenderbag size S (available separately) Note: Delivery does NOT include any tools etc. shown on the picture above!

ENDURISTAN's Small Parts Organizer is a compactly sized bag made of extremely tough and long-lasting synthetic material. Featuring numerous partitions, pockets and holding loops, it is the ideal solution for securely carrying smallish items such as smart phones, tablets, cables, tools etc. on a motorbike. Specifications Made of sturdy synthetic material Volume: 2 liters Size: Approx. 20 cm x 15 cm x 8 cm (8" x 6" x 3") (L x W x H) Weight: Approx. 0.1 kg (without contents) Red inner lining for high visibility 7 inside zipper pockets 3 of the zipper pockets are made of mesh for instant recognition of the content 53 elastic loops in 7 different sizes Suspension clip Large white labeling area on top cover Additional labeling field next to outside handle Washable and easy to clean Built to last

Being the smallest member of the ENDURISTAN Sandstorm 4 family, the 4S has specifically been designed to fit the narrow tanks of hard enduros and to carry the essentials for an adventurous bike trip. Specifications Made of tough, high-quality 3-layer synthetic material Red inner lining for high visibility 100% waterproof - no rain cover or inner bag required Volume: 7-12 liters, steplessly variable Size: Approx. 30 cm x 20 cm x 16/24 cm (12" x 8" x 6/9.5") (L x W x H) Weight: Approx. 1.2 kg (without contents) Stable and tight-fitting Quick and easy mounting Quick access for refueling No flapping straps Large waterproof map pocket on top (28 cm x 19 cm) Waterproof cable bushing to tankbag and map pocket (similar to Sandstorm 4H) to allow charging of smartphones etc. 1 fold-away partition in the main compartment All zippers by YKK® Removable document pouch under the cover with pen holder Fastened by ROK® straps which can be stored under the floor construction for comfortable off-bike carrying Deluxe shoulder strap available separately Washable and easy to clean Built to last Delivery includes: 3 compression straps 1 front fastening strap 2 rear fastening buckles Instruction manual

Spacious luggage bag by ENDURISTAN, made of high-quality, waterproof synthetic material. With two rows of fixed cargo loops to accommodate the ROK® straps, ENDURISTAN's Tornado 2 Pack Sack does not only offer substantial luggage space, but also features a high-quality and secure tie-down system for the bike. The cargo loops may also be used to attach any additional gear.Specifications Made of sturdy 3-layer synthetic material 100% waterproof Red inner lining for high visibility 1 inside zipper pocket 3 inside mesh pockets 2 rows of cargo loops to attach additional gear Ergonomic soft grip handle Deluxe shoulder strap available separately Card holder 4 compression straps Washable and easy to clean Built to last Delivery includes instruction manual Available sizes Size Volume Width Diameter   S 20 liters 45 cm (17.5") 24 cm (9.5")   M 32 liters 53 cm (21") 27 cm (10.5")   L 51 liters 61 cm (24") 32 cm (12.5") XL 82 liters 67 cm (26.5")   38 cm (15")