Honda CRF 1000 L Africa Twin

High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned Honda models.  The ALTRIDER Adjustable Side Stand is the only side stand for the CRF1000L and CRF1100L Africa Twin that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at an optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Fits: Honda CRF1000L Africa Twin/ ADV Sports Honda CRF1100 Africa Twin/ ADV Sports

High-quality adjustable clutch arm extension by ALTRIDER, specifically designed for the Honda CRF1000L and CRF1100L Africa Twin/ ADV Sports models. While the OEM Honda clutch arm is well designed for casual riding, technical off-road riding with heavy clutch work can quickly fatigue a riders hand and forearm. The ALTRIDER extension helps reducing the riders' fatigue, at the same time increasing the clutch feel. Specifications Designed and manufactured in the USA Replaces OEM clutch arm CNC machined from 6061 T6 aluminum Clevis clip is formed from stainless steel Variably adjustable Designed to reduce clutch pull by up to 33% and to increase feel Delivery includes all the necessary mounting material Available in anodized black NOTE: Not compatible with any DCT models, nor with the SW-MOTECH Crash Bars or the ALTRIDER Clutch Arm Guard!

High-quality clutch arm guard by ALTRIDER made of tough aluminum, suitable for the Honda CRF 1000 L Africa Twin model (see below). The Africa Twin’s clutch articulation arm and cable sit exposed on the right hand side of the engine case, covered only by an OEM plastic cover which offers virtually no protection. ALTRIDER’s clutch arm guard for the Africa Twin replaces the plastic cover with far greater coverage to this vital area while offering a clean aesthetic to the right side engine case.More robust than other clutch arm covers on the market, ALTRIDER’s design incorporates three unique mounting points to evenly distribute the load from impacts across the guard. With strategic mounting points and bends, the design is engineered to counter the stresses placed on thin aluminum parts after a lifetime of engine vibrations. ALTRIDER’s clutch arm guard is laser-cut out of 2 mm thick 5052 aluminum and features a formed, anodized and grained surface for maximum durability. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of anodized aluminum for robust yet lightweight protection Suitable for Honda CRF 1000 L Africa Twin, including Adventure Sports (NON-DCT-only!) Available in silver or black - please select from above

High-quality, practical luggage rack system by ALTRIDER, suitable for he Honda CRF1000L Africa Twin. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. Both racks are compatible with factory side cases and are available in both a clear anodized silver and black anodized finish. Specifications Laser cut from 3/16 in (4.76 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases Solid top surface on pillion rack helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin standard models from MY 2018 - 2019 (not suitable for Adventure-Sports-models)

High-quality clear headlight guard by ALTRIDER, suitable for the Honda CRF1000L Africa Twin. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening it at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States from 2mm laser-cut stainless steel, the mesh headlight guard mounts to four factory hard points by way of the 2mm thick laser-cut stainless steel mounting bracket. The quick-release system means no tools are required to remove the mesh screen for cleaning in the field. Specifications Made from 2mm laser-cut stainless steel Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in black powdercoated or silver brushed stainless steel-matte - please select from above NOT compatible with OEM upper light bar!

High-quality pillion luggage rack by ALTRIDER, suitable for the Honda CRF1000L Africa Twin. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with factory side cases and the factory rear top box, and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin Standard        MY 2018 and up Honda CRF1000L Africa Twin ADV Sports    MY 2017 and up

High-quality radiator guard by ALTRIDER, suitable for the Honda CRF1000L Africa Twin (Standard and Adventure Sports models). A radiator puncture due to road debris is a serious threat to ruin your day of riding. That is why ALTRIDER radiator guards were designed to protect the radiator from road debris while allowing as much airflow as possible. ALTRIDER radiator guards are constructed from 1.4mm aluminum and feature louvered cutouts, a technique that serves two important purposes. First, the bent louvers increase the stiffness of each guard in comparison to guards with flat cutouts or screens. Second, the louvers allow greater airflow compared to flat cutouts while the angled design provides maximum coverage from rocks and other debris. The laser cut guards are grained to remove burrs, formed and anodized for durability. Each radiator guard floats above the radiator itself to allow full cooling function, and mounts to three factory hard points for robustness. Installation is a breeze with the included high quality hardware, and no cutting or other modifications are necessary. ALTRIDER radiator guards for the Africa Twin are available in silver and black, and are 100% designed and manufactured in the USA. Specifications Constructed from 1.4mm aluminum Louvers increase strength and allow greater airflow Mounts to three factory hard points Available in silver and black

High-quality rear brake master cylinder guard by ALTRIDER, suitable for the Honda CRF 1000 L Africa Twin, MY 2016-2017. The Honda CRF 1000 L Africa Twin checks in at over 400 pounds without a rider - requiring every bit of braking power to stop in a hurry. This custom-made rear brake reservoir guard by ALTRIDER provides reliable safety for the rear brakes. Constructed from lightweight aluminum, the rear brake reservoir guard keeps errant rocks and debris from taking out the rider's ability to stop. The deliberate design of the guard locks the cover in place, preventing contamination of the delicate braking system. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of anodized aluminum for robust yet lightweight protection Suitable for Honda CRF 1000 L Africa Twin, MY 2016-2017 Available in anodized silver, red or black - please select from above

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1000L Africa Twin. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin standard models from MY 2016 (does not fit any Adventure Sports models!)

High-quality GPS mount by the US manufacturer ALTRIDER, universally sized for the mounting on bars and tubes with a diameter of 12 mm, 14 mm, 16 mm and 22 mm. Delivery includes an AMPS pattern for BOTH orientations, i. e. portrait and landscape. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Includes an AMPS bolt pattern to securely mount any GPS units 4-hole pattern for vertical use, 2-hole pattern for horizontal use Compatible with RAM mounts (ball adapters, sizes A, B and C) and Garmin Zumo cradles Delivery includes the necessary stainless steel hardware Compatible with the ALTRIDER Yamaha Tenere 700 Cowl Support Bracket (available separately) Available in anodised matte black  Note: Mounting from the rear of the adapter plate is not possible, so this product is not compatible with TomTom mounts without any modifications.

High-quality voltage regulator guard by ALTRIDER, suitable for the below-mentioned Honda models. When venturing off the beaten paths, it is important to keep any bike’s vitals protected from stray branches, flying rocks or anything else. That includes the voltage regulator, an integral component responsible for maintaining the battery charge and keeping the bike’s electrical system up and running. ALTRIDER’s voltage regulator guard for the Honda Africa Twin is an upgrade from the stock guard that leaves the voltage regulator completely exposed to debris from the rear tire and chain. The guard offers comprehensive protection in the form of a sturdy 1/8 inch (3.2 mm) thick piece of laser-cut aluminum. It easily mounts to the OEM mounting points with the included stainless steel hardware. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 1/8" (3,2mm) anodized aluminum for robust yet lightweight protection Mounts to OEM mounting points with included stainless steel hardware Available in silver or black - please select from above Suitable for: Honda CRF 1000 L Africa Twin Standard                 from MY 2016 Honda CRF 1000 L Africa Twin Adventure Sports  from MY 2018

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for Honda models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers Suitable for: Honda CRF 1000 L Africa Twin with and without DCT SD 04   from MY 2015 Honda CRF 1000 L Africa Twin with and without DCT SD 06   from MY 2017

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black

High-quality BARKBUSTERS plastic handguards for JET01 and JET02 (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above)

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system!

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface)

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones Available in various different colours (please select from above) Other colours on request

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics Note: Does NOT fit with Storm plastics! Available in black

High-quality GLOBESCOUT luggage rack for mounting the XPAN+ Top Cases, specifically constructed for the below-mentioned Honda models. Specifications  Made of a sturdy aluminium-magnesium mixed alloy Colour: Natural anodized Fits with the GLOBESCOUT Series I + II Top Cases  Suitable for: Honda CRF1000L Africa Twin standard models from MY 2016

High-quality brake light switch by JMP, suitable for the below-mentioned Honda models. In terms of shape and function, all JMP brake light switches correspond to the OEM parts. Suitable for: Honda CB 500 X                             2013+ CRF 250 L/M/R/X/Rally     2013-2018 CRF 300 L/Rally                 2021+ CRF 450 L                           2019+ CRF 1000 L Africa Twin    2016-2020