Honda CRF 1100 L Africa Twin

High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned Honda models.  The ALTRIDER Adjustable Side Stand is the only side stand for the CRF1000L and CRF1100L Africa Twin that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at an optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Fits: Honda CRF1000L Africa Twin/ ADV Sports Honda CRF1100 Africa Twin/ ADV Sports

High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black Note: NOT compatible with the OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Standad (does NOT fit the Adventure Sports models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Improper cleaning can result in scratches, hazing, surface crazing and cracking.

High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black NOT compatible with OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Adventure Sports (does NOT fit the Standard models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Cleaning improperly can result in scratches, hazing, surface crazing and cracking.

High-quality adjustable clutch arm extension by ALTRIDER, specifically designed for the Honda CRF1000L and CRF1100L Africa Twin/ ADV Sports models. While the OEM Honda clutch arm is well designed for casual riding, technical off-road riding with heavy clutch work can quickly fatigue a riders hand and forearm. The ALTRIDER extension helps reducing the riders' fatigue, at the same time increasing the clutch feel. Specifications Designed and manufactured in the USA Replaces OEM clutch arm CNC machined from 6061 T6 aluminum Clevis clip is formed from stainless steel Variably adjustable Designed to reduce clutch pull by up to 33% and to increase feel Delivery includes all the necessary mounting material Available in anodized black NOTE: Not compatible with any DCT models, nor with the SW-MOTECH Crash Bars or the ALTRIDER Clutch Arm Guard!

High-quality pillion luggage rack by ALTRIDER, suitable for the below-mentioned Honda models. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!) Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!) Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin Adventure Sports model. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin ADV Sports from MY 2020 (also fitting the standard model with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!)

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin standard model. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020

High-quality side stand enlarger by ALTRIDER, suitable for the below-mentioned Honda models. The enlarger is laser-cut and machine-formed to perfectly fit onto the Honda Africa Twin’s side stand foot. Torx fasteners secure the enlarger to the side stand foot while reducing the risk of tool stripping during installation. The weight is minimal to avoid the side stand bouncing around and inadvertently cutting the ignition. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made from 1/8 in (3.18 mm) thick stainless steel Two-piece design for a perfect fit Minimal weight to avoid accidental deployment during riding Available in brushed silver or powder-coated black - please select from above Suitable for: Honda CRF1100L Africa Twin Standard Honda CRF1100L Africa Twin Adventure Sports

High-quality skid plate by ALTRIDER, specifically designed for the HONDA CRF1100L Africa Twin model. This tough and robust skid plate was engineered from the ground up to provide better coverage, strength and ground clearance than any other skid plate on the market.  HONDA’s Africa Twin utilizes a classic dirtbike-inspired dual frame rail. ALTRIDER embraced this approach by designing a skid plate that builds on the advantages provided by this type of frame. Unlike other designs on the market, ALTRIDER utilizes 4 bolt locations on the frame instead of nesting the bracket on one side. This bracket design provides a strong platform to mount the skid plate using 4 heavy duty M8 (5/16”) bolts. Ground clearance is an extremely important but often overlooked consideration, especially on bigger bikes. HONDA made the effort to give this bike substantial clearance, and thanks to the bike’s frame rail design the ALTRIDER skid plate was engineered to retain as much of that clearance as possible when installed. Some skid plates utilize a corrugated design to enhance strength, but those designs also sacrifice clearance. The ALTRIDER skid plate was given a smooth bottom design for maximum clearance and easy maneuvering over obstacles, and the 4 mounting points on the frame rails make up that strength. ALTRIDER’s intelligent bracket design allows users to change the oil with the bracket in place. The skid plate is also compatible with the center stand on, and can be installed on both DCT and manual transmission models. The one-piece skid plate is simple to install, and all top-quality hardware is provided. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Custom-made for the HONDA CRF1100L Africa Twin model Also fitting the Adventure Sports model after removing the original HONDA skid plate Single piece of 4.1 mm aluminum is laser cut, grain finished, formed and TIG welded Protects entire bottom side of liquid cooled motor including headers Cut outs allow for airflow and heat dissipation Larger 2” diameter formed bends for added strength and better cornering clearance Smooth bottom surface for ground clearance and ability to slide over obstacles without getting hung up Mounts to four factory hard points, and rubber shock absorbing bumpers spread load to frame rails Mounting bracket has captured threaded fasteners for ease of installation Stainless steel fasteners for long life and corrosion resistance Compatible with HONDA Light Bar Note: NOT compatible with the optional DCT foot shifter! Available in powder-coated black

High-quality GPS mount by the US manufacturer ALTRIDER, universally sized for the mounting on bars and tubes with a diameter of 12 mm, 14 mm, 16 mm and 22 mm. Delivery includes an AMPS pattern for BOTH orientations, i. e. portrait and landscape. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Includes an AMPS bolt pattern to securely mount any GPS units 4-hole pattern for vertical use, 2-hole pattern for horizontal use Compatible with RAM mounts (ball adapters, sizes A, B and C) and Garmin Zumo cradles Delivery includes the necessary stainless steel hardware Compatible with the ALTRIDER Yamaha Tenere 700 Cowl Support Bracket (available separately) Available in anodised matte black  Note: Mounting from the rear of the adapter plate is not possible, so this product is not compatible with TomTom mounts without any modifications.

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned Honda models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately) Fits: Honda CRF 1100 L Africa Twin with and without DCT  Honda CRF 1100 L Africa Twin Adventure Sports with and without DCT

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black

High-quality BARKBUSTERS plastic handguards for JET01 and JET02 (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above)

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system!

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface)

MFC-28 Bracket - delivered as a spare part for the BARKBUSTERS BHG-082 article (Honda CRF100L Africa Twin). Delivery includes 1 piece.

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones Available in various different colours (please select from above) Other colours on request

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics Note: Does NOT fit with Storm plastics! Available in black

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Honda CRF 1100 L Africa Twin model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two Honda Strap Mounts included in the delivery, which are simply exchanged for the original mountings. The four CRF Bolt-on Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).  The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ENDURISTAN Inferno one (available separately). Specifications Specifically designed and manufactured for the Honda CRF 1100 L Africa Twin model (does NOT fit the Adventure Sports models!!!) Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1150g / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x Honda strap mounts and 4 x CRF bolt-on loops Also including 2x (L+R) pre-cut paintwork protection film 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE is mounted on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. For reasons of protection, this kit includes a pre-cut clear adhesive protective film. Over a long period of time, this may need to be replaced where abrasion may occur on the motorcycle.

High-quality, functional alternator cover by POLISPORT, fitting the below-mentioned motorcycle models. Ideal for protecting the alternator against any damage during tough riding situations, especially off-road. Specifications Made of extremely tough PA6 polyamide material Abrasion and impact resistant Perfect fit High temperature resistance Easy to install, i. e. the alternator does not need to be removed Only compatible with the original alternator! Delivery includes all the necessary mounting material Available in black Fitting: Honda CRF 1100 L Africa Twin MY 2020 Honda CRF 1100 L Africa Twin Adventure Sports MY 2020-2021