KTM 1290 Super Adventure

High-quality, oversized billet foot pegs by the US manufacturer ALTRIDER, custom-made for the below-mentioned KTM, Husqvarna and Yamaha models. For further information, please see below. Specifications Precision-made of heavy duty, high-quality 6061-T6 billet aluminum Tread area size: 2,28" x 4,8" (58 mm x 122 mm) - depth x width Surface equipped with several screwed pins for a maximum grip and braking sensation Specifically designed to prevent most dirt and mud from clinging to the pegs Delivery includes 2 uprated springs and all the necessary mounting material Available in black anodised Suitable for: Husqvarna Husqvarna Norden 901 (2022+) Husqvarna 701              (2016+) KTM KTM 690 Enduro R       (2008+) KTM 790 ADV S / R      (2019-2020) KTM 890 ADV R           (2021+) KTM 950 Adventure (2003-2006) KTM 990 Adventure (2006-2012) KTM 1090 Adventure R / S KTM 1290 S Adventure S KTM 1290 Super Adventure R / S / T KTM 125 EXC / SX (1998-2016) KTM 150 SX / XC (2010-2016) KTM 200 EXC / XC-W (2006-2016) KTM 250 EXC / SX / XC / XCF-W (2006-2016) KTM 300 EXC / XC (2006-2016) KTM 350  EXC-F / SX-F / XCF-W (2012-2016) KTM 400 EXC (2009-2011) KTM 450 EXC / SX-F / XC-W (2009-2016) KTM 500 EXC / XC-W (2012-2016) KTM 530 EXC / XC-W (2009-2011) KTM 990 Supermoto R / T (2013) KTM Freeride 250 F / R (2015-2016) KTM Freeride 350 (2012-2016) KTM Freeride E-XC (2015-2016) Yamaha Yamaha Tenere 700      (2019+)  

High-quality clutch side engine case cover by ALTRIDER, suitable for the below-mentioned KTM Adventure models. The OEM engine case on the KTM Adventure/R and SA models is made from a thin-walled cast aluminum. This choice helps to save overall weight, but also creates a weak point on a vital piece of the engine. If the KTM Adventure/R and SA models are laid down on their right sides, there is a real danger of the engine case becoming damaged by large debris or even from the brake lever tip bending into it, potentially bursting into the case. Compared to several competitor options made from molded plastic, ALTRIDER created an engine case cover made from a single piece of 3.2 mm aluminum. This exceptionally strong 6061-TG6 aluminum alloy has a tensile strength of at least 42,000 psi (300 MPa) and yield strength of at least 35,000 psi 241 MPa. Rubber backers spread the load of impact, as well as allow the cover to maintain a low profile. Flush stainless steel fasteners and a deburred product prevent scuffing up the rider's boots and pants. The design of the case cover also incorporates the ingenuity of the ALTRIDER Brake Lever Shield, preventing unwanted and unexpected early braking. The close design of the OEM brake lever creates early interference with the rider's boot during braking. This is unique to the KTM Adventure/R and SA models as KTM worked hard to make the large displacement engine still feel narrow, which in turn provided little options for routing the rear brake lever. The lever arm extends into the rider boot area above the brake tip, thus creating earlier-than-expected braking. An outward flange on the ALTRIDER Engine Case Cover prevents accidental engagement of the brake arm while still providing a surface to properly hug the bike with the boot, all without interrupting any feel or ergonomics. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Protects engine case from damage caused by debris or rear brake lever Prevents accidental engagement of rear brake Easy installation with flush mount hardware  Deburred to prevent snagged or caught clothing Made of 3.2 mm (1/8 in.) aluminum Available in black and orange (please select from above) Suitable for KTM 1050 1090 1190 Adventure/R and 1290 SA

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position.  Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 100% designed and manufactured in the USA 25.4 mm riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Replaces KTM, Husqvarna, and Husaberg OEM part numbers: 60013051000, 54813951000, 81213951000, 54813051100 and 54813051000 Suitable for: KTM 1190 Adventure / R KTM 1290 Super Adventure KTM 990 and 950 Adventure  KTM 690 Enduro KTM 125-540cc bikes Husqvarna 125-501 cc bikes For full fit list click here

Set of mounting brackets to mount the ALTRIDER Skid Plate KT13-x-1200 (available separately) to the below-mentioned KTM models. Suitable for: KTM 1290 Super Adventure        2015-2016 KTM 1290 Super Adventure T     from MY 2017

This unique ALTRIDER luggage rack for the KTM Adventure-models can be mounted in multiple positions to suit most luggage needs. Bolt it directly to the factory rack to create a larger, more versatile platform for any gear. The rack can also replace the OEM rack, bringing the load and center of gravity closer to the ground. Finally, the luggage rack can be mounted without the factory rack or passenger grab handles – allowing to combine it with the ALTRIDER pillion rack to create a flat, continuous luggage surface.  All ALTRIDER luggage racks directly integrate with ROTOPAX fuel packs. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. Hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing strength. Learn more about how ALTRIDER luggage racks are developed in our blog post Hooked: How We Developed Our Luggage Racks. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Luggage rack can be mounted in multiple configurations Strategically placed cutouts provide ample mounting points without sacrificing strength Completely smooth luggage surface 3/16” (4.8 mm) laser-cut anodized aluminum Interfaces with ROTOPAX fuel packs Available in silver or black Suitable for: Husqvarna Norden 901 KTM 790 Adventure/R 890 Adventure L/R 1050 Adventure 1090 Adventure/R 1190 Adventure/R 1290 Super Adventure R-S-T

High-quality side stand foot from ALTRIDER, suitable for the below-mentioned KTM Adventure models. Featuring a completely new 3 piece design, the ALTRIDER side stand foot fully surrounds the stand, preventing it from coming loose no matter how rough the ride. The ‘fingers’ of the upper ring grip the top of the pad, while allowing a small amount of flexibility to account for any variation in the weld bead. Button-top hex screws and provided Loctite fasten the 3 components together - ensuring a firm grip for worry-free riding. The stout bottom plate gives the hardware plenty of material to bite, preventing anything from rattling loose. A 3D design allows easy deployment of the side stand even while wearing boots. The side stand foot is constructed from durable stainless steel, and is available in raw silver or powder coat black. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 3-piece design ensures fully secure fit 3D tread design allows easy deployment with riding boots Stainless steel construction extremely resistant to rust and weathering Available in black Suitable for: KTM 790 Adventure/R KTM 1050 Adventure KTM 1090 Adventure KTM 1190 Adventure/R MY 2014 and up KTM 1290 Super Adventure R/S/T

This high-quality ALTRIDER skid plate suitable for the below-mentioned KTM models is laser-cut from aluminum with an anodized finish that is extremely resistant to weathering. The intelligent design features large radius corners and flared edges to provide absolute coverage for the motor, clutch pack, and stator while maintaining exceptional strength. The skid plate also provides coverage for the side stand mount, eliminating the need for a side stand relocation kit. Special consideration was made to preserve the impressive ground clearance and turning radius of the KTM.  The front of the skid plate mounts via steel brackets that utilize OEM mounting points. The rear brackets are also precision manufactured from steel. ALTRIDER created the only design on the market that attaches to the frame and the footpeg mounting point. The frame + footpeg mount combo creates an incredibly strong support that will easily handle the rough terrain the KTMs were built for. The keyed design of the rear brackets adds strength while simplifying the installation process. To further bolster the side stand strength, the rear mounting bolts pass through the side stand mounting bracket. To see the development process for the KTM 1050 1090 1190 1290 Adventure skid plate, check out this blog post. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 4mm anodized aluminum that protects front and bottom of the motor from trail debris Steel front and rear mounts provide superior strength Compatible with the KTM factory crash bars Available in silver or black  Suitable for: KTM 1050 Adventure and Adventure R KTM 1090 Adventure and Adventure R KTM 1190 Adventure and Adventure R from MY 2015 KTM 1290 Super Adventure R KTM 1290 Super Adventure S

This high-quality ALTRIDER skid plate suitable for the below-mentioned KTM models is laser cut from aluminum with an anodized finish that is extremely resistant to weathering. The intelligent design features large radius corners and flared edges to provide absolute coverage for the motor, clutch pack, and stator while maintaining exceptional strength. The skid plate also provides coverage for the side stand mount, eliminating the need for a side stand relocation kit. Special consideration was made to preserve the impressive ground clearance and turning radius of the KTM.  The front of the skid plate mounts via steel brackets that utilize OEM mounting points. The rear brackets are also precision manufactured from steel. ALTRIDER created the only design on the market that attaches to the frame and the foot peg mounting point. The frame + foot peg mount combo creates an incredibly strong support that will easily handle the rough terrain the KTM 1290 Super Adventure was built for. The keyed design of the rear brackets adds strength while simplifying the installation process. To further bolster the side stand strength, the rear mounting bolts pass through the side stand mounting bracket. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of anodized aluminum that protects front and bottom of motor from trail debris Steel front and rear mounts provide superior strength Compatible with the KTM factory crash bars Available in silver or black - please select from above Suitable for: KTM 1290 Super Adventure        2015-2016 KTM 1290 Super Adventure T     from MY 2017 For the skid plate for the KTM 1290 SA R and S-models - please klick here.

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned KTM models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately) Suitable for: KTM 1290 Super Adventure R 2021+ KTM 1290 Super Adventure S 2021+

Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars. Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers Please note: Installation on the following models requires the additional fixing of the Spacer and Bolt Kit BARKBUSTERS B-078 (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden KTM 790  Adventure/R KTM 890  Adventure/R KTM 1190 Adventure/R KTM 1290 Super Adventure R/S

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black

High-quality BARKBUSTERS plastic handguards for JET01 and JET02 (available separately, see below). Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above)

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system!

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface)

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white

High-quality kit by BARKBUSTERS, made for use with backbone-kits in order to ensure the necessary space / clearance between the clamp or backbone and any nearby components. Available in 3 different sizes (see below). Please select from the following sizes: 1 x   7mm spacer - 1 x bolt M8 x 35 mm 1 x 10mm spacer - 1 x bolt M8 x 35 mm 1 x 20mm spacer - 1 x bolt M8 x 45 mm 1 x 30mm spacer - 1 x bolt M8 x 55 mm

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones Available in various different colours (please select from above) Other colours on request

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics Note: Does NOT fit with Storm plastics! Available in black

Uniquely designed low-profile fasteners by KRIEGA, fitting the original rear racks of the KTM 1090, 1190 and 1290 Adventure models to create 4 hook points for mounting any KRIEGA US- or OS-Tailpack from 5 to 30 litres (available separately). Specifications Made of tough, lightweight T6 alloy - only 25 g per loop Also perfect for mounting roll-top bags and tents using KRIEGA Cam Straps or OS-Cam Straps (available separately) Easy fit - no drilling required 19mm nylon loops Delivery includes 4 fasteners with matching nylon washers 10-year guarantee - learn more

High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned KTM and Husqvarna models. Available in 3 different colours - for further information, please see below. Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 3/4" (2 cm) lower than the original foot pegs 5/16" (0,8 cm) rearward compared to the original position Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Suitable for: Husqvarna 701                         all Husqvarna 901 Norden          all KTM 690                                    all KTM 790                                    all KTM 890                                    all KTM 1050/1090/1190/1290    all GasGas 700

High-quality, oversized and lowered foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned models. Specifications TIG-welded of heavy duty, high-quality stainless steel Skeletal design for shedding of mud/debris Heavy  duty machined clevis for added strength and perfect fitment 1.0" (25 mm) lower than the original foot pegs Tread area size: 2-3/8" x 3-3/4"  (60 mm x 90 mm) - depth x width Internal stiffener and low profile underside gussets to maintain ground clearance and exceptional strength 3 taller outer teeth to reduce side slip (taller by 2mm) Includes new pair of cotter pins (factory springs are reused) Fits: Husqvarna 701                           all Husqvarna 901                           all KTM 690                                      all KTM 790/890                              all KTM 1050/1090/1190/1290      all GasGas 700 Enduro + SMC.     all

High-quality side stand bypass dongle by the US manufacturer VANASCHE MOTORSPORTS, suitable for the below-mentioned models. KTM/Husqvarna/GasGas have gone to great lengths to provide a side stand sensor that cannot be tampered with by not allowing any gear engagement without the side stand in the "UP" position. In spite of the undisputed safety aspect, there are a few other issues. If this sensor is to fail (or the magnet lost) while in the field, the rider will be left stranded. However, this is not a simple roadside repair, like cutting the switch off and twisting wires together or even digging up a proper resistor to temporarily alleviate the problem. This is a 50% duty cycle square wave that would be almost impossible to duplicate without the proper hardware, an oscilloscope, and the necessary knowledge in circuits/electronics.   Carrying one of these dongles on the bike provides for a little peace of mind should the OEM product fail.  WARNING: This product is to be carried as a spare part and to be used to get rider and  bike to safety when the OEM sensor fails. It is NOT to be installed while the OEM side stand sensor is operating normally, as this allows the bike to engage gears with the side stand still in the down position which can result in property damage and/or injury. Suitable for:  Husqvarna 701 - Enduro & SMC & Vitpilen    2017-2021 US models Husqvarna 701 - Enduro & SMC & Vitpilen    2017-2020 EU models KTM 690 - Enduro & SMC                                 2019-2021 US models KTM 690 - Enduro & SMC                                 2019-2020 EU models KTM 690 - Duke                                                 from MY 2016 KTM 1090 Adventure                                       all KTM 1290 Adventure                                       from MY 2017 GasGas 700 Enduro + SMC  Note: Regarding the KTM 690 and Husqvarna 701 EU models from MY 2021, the corresponding dongle can be puchased here!